Serial femtosecond crystallography reveals that photoactivation in a fluorescent protein proceeds via the hula twist mechanism

Chromophore cis/trans photoisomerization is a fundamental process in chemistry and in the activation of many photosensitive proteins. A major task is understanding the effect of the protein environment on the efficiency and direction of this reaction compared to what is observed in the gas and solution phases. In this study, we set out to visualize the hula twist (HT) mechanism in a fluorescent protein, which is hypothesized to be the preferred mechanism in a spatially constrained binding pocket. We use a chlorine substituent to break the twofold symmetry of the embedded phenolic group of the chromophore and unambiguously identify the HT primary photoproduct. Through serial femtosecond crystallography, we then track the photoreaction from femtoseconds to the microsecond regime. We observe signals for the photoisomerization of the chromophore as early as 300 fs, obtaining the first experimental structural evidence of the HT mechanism in a protein on its femtosecond-to-picosecond timescale. We are then able to follow how chromophore isomerization and twisting lead to secondary structure rearrangements of the protein β-barrel across the time window of our measurements

Populations and coherence in femtosecond time resolved X-ray crystallography of the photoactive yellow protein

Ultrafast X-ray crystallography of the photoactive yellow protein with femtosecond delays using an X-ray free electron laser has successfully probed the dynamics of an early Franck-Condon species. The femtosecond pump-probe application of protein crystallography represents a new experimental regime that provides an X-ray structural probe for coherent processes that were previously accessible primarily using ultrafast spectroscopy. We address how the optical regime of the visible pump, that is necessary to successfully resolve ultrafast structural differences, affects the motions that are measured using the technique. The sub-picosecond photochemical dynamics in PYP involves evolution of a mixture of electronic ground and excited state populations. Additional to photoisomerisation that is considered to proceed through activated barrier crossing, within the dephasing time structural motion include vibrational coherence arising from excited states, the ground state and a ground state intermediate under experimental conditions used for ultrafast crystallography. Intense optical pulses are required to convert population levels in PYP crystals that allow detection by X-ray crystallography, but the compromise currently needed for the optical bandwidth and power has consequences with regard to the contributions to the motions that are experimentally measured with femtosecond delays. We briefly review the ultrafast spectroscopy literature of the primary photoreactions of PYP and discuss relevant physical models taken from coherent control and femtosecond coherence spectroscopy literature that address both the population transfer as well as the vibrational coherences. We apply linear response theory, with the additional use of a high power approximation, of on-resonance impulsive vibrational coherence in the ground state and the non-impulsive coherence in the excited state and discuss experimental approaches to manipulate the coherence contributions. The results are generalised and extended to discuss the future capabilities of high repetition rate X-ray free electron laser instruments providing enhanced sensitivity to perform the crystallographic equivalent of an impulsive Raman measurement of vibrational coherence

Optical control, selection and analysis of population dynamics in ultrafast protein X-ray crystallography

Ultrafast pump-probe X-ray crystallography has now been established at XFELs that operate at hard X-ray energies. We discussthe performance and development of current applications in terms of the available data quality and sensitivity to detect and analyse structural dynamics. A discussion of technical capabilities expected at future high repetition rate applications as well as future non-collinear multi-pulse schemes focuses on the possibility to advance the technique to the practical application of the X-ray crystallographic equivalent of an impulse time-domain Raman measurement of vibrational coherence. Furthermore, we present calculations of the magnitude of population differences and distributions prepared with ultrafast optical pumping of single crystals in the typical serial femtosecond crystallography geometry, which are developed for the general uniaxial and biaxial cases. The results present opportunities for polarization resolved anisotropic X-ray diffraction analysis of photochemical populations for the ultrafast time domain

Open hardware microsecond dispersive transient absorption spectrometer for linear optical response

An open hardware design and implementation for a transient absorption spectrometer are presented that has microsecond time resolution and measures full difference spectra in the visible spectral region from 380 to 750 nm. The instrument has been designed to allow transient absorption spectroscopy measurements of either low or high quantum yield processes by combining intense sub-microsecond excitation flashes using a xenon lamp together with stroboscopic non-actinic white light probing using LED sources driven under high pulsed current from a capacitor bank. The instrument is sensitive to resolve 0.15 mOD flash-induced differences within 1000 measurements at 20 Hz repetition rate using an inexpensive CCD sensor with 200 μm pixel dimension, 40 K electrons full well capacity and a dynamic range of 1800. The excitation flash has 230 ns pulse duration and the 2 mJ flash energy allows spectral filtering while retaining high power density with focussing to generate mOD signals in the 10–4–10–1 ΔOD range. We present the full electronics design and construction of the flash and probe sources, the optics as well as the timing electronics and CCD spectrometer operation and modification for internal signal referencing. The performance characterisation and example measurements are demonstrated using microsecond TAS of Congo red dye, as an example of a low quantum yield photoreaction at 2% with up to 78% of molecules excited. The instrument is fully open hardware and combines inexpensive selection of commercial components, optics and electronics and allows linear response measurements of photoinduced reactions for the purpose of accurate global analysis of chemical dynamics

Coincidence timing of femtosecond optical pulses in an X-ray free electron laser

Femtosecond resolution pump-probe experiments are now routinely carried out at X-ray Free Electron Lasers, enabled by the development of cross-correlation “time-tools” which correct the picosecond-level jitter between the optical and X-ray pulses. These tools provide very accurate, <10 fs, measurement of the relative arrival time, but do not provide a measure of the absolute coincidence time in the interaction. Cross-correlation experiments using transient reflectivity in a crystal are commonly used for this purpose, and to date no quantitative analysis of the accuracy or stability of absolute coincidence time determination has been performed. We have performed a quantitative analysis of coincidence timing at the SACLA facility through a cross-correlation of 100 6 10 fs, 400 nm optical pulses with 7 fs, 10.5 keV X-ray pulses via transient reflectivity in a cerium-doped yttrium aluminum garnet crystal. We have modelled and fit the transient reflectivity, which required a convolution with a 226 6 12 fs uncertainty that was believed to be dominated by X-ray and laser intensity fluctuations, or assuming an extinction depth of 13.3 lm greater than the literature value of 66.7 lm. Despite this, we are able to determine the absolute coincidence time to an accuracy of 30 fs. We discuss the physical contributions to the uncertainty of coincidence time determination, which may include an uncharacterised offset delay in the development of transient reflectivity, including cascading Auger decays, secondary ionisation and cooling processes. Additionally, we present measurements of the intrinsic short-term and long-term drifts between the X-rays and the optical laser timing from time-tool analysis, which is dominated by a thermal expansion of the 25 m optical path between tool and the interaction region, seen to be 60 fs over a period of 5 h

X-ray Free Electron Laser Determination of Crystal Structures of Dark and Light States of a Reversibly Photoswitching Fluorescent Protein at Room Temperature.

The photochromic fluorescent protein Skylan-NS (Nonlinear Structured illumination variant mEos3.1H62L) is a reversibly photoswitchable fluorescent protein which has an unilluminated/ground state with an anionic and cis chromophore conformation and high fluorescence quantum yield. Photo-conversion with illumination at 515 nm generates a meta-stable intermediate with neutral trans-chromophore structure that has a 4 h lifetime. We present X-ray crystal structures of the cis (on) state at 1.9 Angstrom resolution and the trans (off) state at a limiting resolution of 1.55 Angstrom from serial femtosecond crystallography experiments conducted at SPring-8 Angstrom Compact Free Electron Laser (SACLA) at 7.0 keV and 10.5 keV, and at Linac Coherent Light Source (LCLS) at 9.5 keV. We present a comparison of the data reduction and structure determination statistics for the two facilities which differ in flux, beam characteristics and detector technologies. Furthermore, a comparison of droplet on demand, grease injection and Gas Dynamic Virtual Nozzle (GDVN) injection shows no significant differences in limiting resolution. The photoconversion of the on- to the off-state includes both internal and surface exposed protein structural changes, occurring in regions that lack crystal contacts in the orthorhombic crystal form